 |
| MANUFACTURER |
John Deere |
|
| MODEL |
350D LC |
|
| DATE OF SPECIFICATION |
May-07 |
|
| ENGINE |
|
|
| Manufacturer/Model |
John Deere / 6090H |
|
| Net Power hp (kW) @ Rated rpm |
271 (202) @ 1900 |
|
| # Cylinders and Desplacement cu in. (L) |
6 - 549 (9.0) |
|
| HYDRAULIC SYSTEM |
|
|
| System Design |
Not published |
|
| Main Pump Type |
Variable axial-piston |
|
| Total Main Pump Flow gpm (L/m) |
152.2 (576) |
|
| Normal Relief Pressure psi (kPa) |
4980 (34310) |
|
| Boost Relief Pressure psi (kPa) |
5260 (36240) |
|
| Max. Propel Pressure psi (kPa) |
4980 (34310) |
|
| UNDERCARRIAGE |
|
|
| Gauge ft (m) |
8' 6" (2590) |
|
| Overall Track Length ft (mm) |
16' 2.5" (4940) |
|
| Track Length on ground ft (mm) |
13' 3.4" (4050) |
|
| Width over Std Track ft (mm) |
11' 1.5" (3390) |
|
| No. of Lower Rollers / Side |
8 |
|
| No. Carrier Rollers / Side |
2 |
|
| Ground Clearance in. (mm) |
19.7" (500) |
|
| Standard Track Pad in. (mm) |
31.5" (800) |
|
| Grd. Press - Std. Pad psi (kPa) |
7.16 (49.3) |
|
| Optional Track Pad in. (mm) |
No pad options |
|
| Max. Travel Speed mph (km/h) |
3.1 (5.0) |
|
| Off-level capacity % - (deg) |
100% (45º) |
|
| Drawbar Pull lb (kg) |
64,375 (29201) |
|
| ARM LENGTH |
|
|
| Standard Arm ft (mm) |
10' 6" |
|
| Optional Arm ft (mm) |
8' 9",13' 1" (2670,3990) |
|
| Bucket Range SAE cu yd (cu m) |
1.26 - 2.74 (0.96 - 2.10) |
|
| Reference Bucket SAE cu yd (cu m) |
2.3 (1.76) |
|
| PERFORMANCE |
|
|
| Reach @ G.L. std. Arm ft (mm) |
35' 9" (10900) |
|
| Max Dig Depth - Std. Arm ft (mm) |
24' 3" (7390) |
|
| Dig Depth-8' Flat Bottom-Std Arm ft (mm) |
23' 8" (7210) |
|
| Dig Depth-Vertical Wall-Std Arm ft (mm) |
21' 1" (6430) |
|
| Dump Height - Std. Arm ft (mm) |
23' 9" (7240) |
|
| Lift Cap. Over Frt @G.L. lb (kg) |
27,598 (12518) @20' |
|
| Lift Cap. 360 deg. @ G.L. lb (kg) |
15,968 (7243) @20' |
|
| Arm Force-Normal- Std. Arm lb (kg) |
Not published |
|
| Arm Force-Boost-Std. Arm lb (kg) |
38,030 (169.2) |
|
| Bucket Digging Force - Normal lb (kg) |
Not published |
|
| Bucket Diggine Force - Boost lb (kg) |
48,220 (214.5) |
|
| Tail Swing Radiue ft (mm) |
11' 0.7" (3370) |
|
| Swing Speed rpm |
10.7 |
|
| TRANSPORT SPECIFICATIONS |
|
|
| Standard Transport Length ft (mm) |
36' 1" (11000) |
|
| Standard Transport Height ft (mm) |
10' 9" (3280) |
|
| Standard Transport Width ft (mm) |
11' 1.5" (3390) |
|
| CAPACITIES |
|
|
| Fuel Tank gal (L) |
166 (628) |
|
| Hydraulic Reservoir gal (L) |
52 (194.9) |
|
| SAE OPERATING WEIGHT lb (kg) |
76,961 (34910) |
|
| Metric Ton Weight |
34.91 |
|
|
| Specifications are based on published information at the time of publication. Specifications are subject to change without notice. |